RadiForce MX220W

Calibration compliant with the DICOM Part 14 standard. This 22" monitor presents a cost- and space-saving alternative to 24.1" monitors by offering the same 1920 × 1200 resolution in 10% less desk space.



DICOM Part 14 Compliant

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.

Widescreen

Widescreen

The widescreen 16:10 aspect ratio provides significantly more horizontal space than the 4:3 or 5:4 aspect ratios of conventional square monitors. The screen is wide enough so that you can keep tool palettes open without covering the window you're working on.


10-bit Color

Each RGB color is supported with a 10-bit input compatibility that displays more than 1 billion colors, providing highly-crisp resolution for 3D color rendering and image fusion.

10-bit color graphics board and 10-bit color viewer software needed for 10-bit color display.

Brightness Uniformity

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is difficult to attain due to the characteristics of LCD monitors, especially with larger screen size.

Brightness Stabilization

At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

This brightness stabilization function is EIZO patented technology (Japan patent numbers 3171808 and 3193315, US patent number 6188380).

Simplified Calibration

When the self-diagnosis function with the bundled RadiCS LE quality control software detects a change in luminance, a warning icon appears on the desktop taskbar enabling prompt detection and correction. Furthermore, the self-calibration function performs simplified calibration compliant with the DICOM Part 14 standard to correct the grayscale tones and brightness of the monitor. This reduces the time spent administering to the monitor.

Calibration Mode Selection

Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.

Backlight Saver with Screen Saver

With ScreenManager Pro for Medical utility software installed, the Backlight Saver function turns off the monitor’s backlight when the screen saver is activated, and turns it on again when the computer comes out of screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Backlight Saver with Viewer Application

By setting the Backlight Saver function to operate with viewer application, the monitor’s backlight is on while the viewer is being used and the backlight is off while the viewer is not being used.

New FlexStand

The highly-versatile FlexStand offer tilt, swivel, height adjustment, and also portrait rotation and laptop-like screen placement which can adjust to any clinical review environment.
Available with either a FlexStand or Height Adjustable Stand.

New FlexStand

DisplayPort Connectivity

Next-generation DisplayPort connectivity allows signal information transmission via a single, high-bandwidth cable at distances up to 15 meters without any signal degradation.

Medical Standards

Meets the strictest medical, safety and EMC emissions standards including TÜV/GM, UL60601-1, CE, CB, CSA C22.2 No.601-1, VCCI, FCC, and FDA 510(k).

5 Year Warranty

EIZO and its authorized distributors offer a five-year limited warranty.

More Precise Calibration with UX1 Sensor

By using the UX1 sensor (sold separately) with the bundled RadiCS LE software, more precise calibration compliant with the DICOM Part 14 standard can be performed.

Clip-On Swing Sensor

Easy calibration compliant with the DICOM Part 14 standard can be performed with the Clip-On Swing Sensor G2 (sold separately). Once attached to the top of the monitor, it can remain in place and is ready for use. This saves the time and trouble of attaching and removing it when performing QC tasks.

Monitor Quality Control Standards Compliance

Quality control tool RadiCS UX1 (sold separately) enables you to perform basic quality checks necessary for clinical review monitors. In addition, high-performance calibration compliant with the DICOM Part 14 standard corrects the fluctuation in monitor quality.

Centralized Management of All Monitors

RadiNET Pro (sold separately) enables centralized management of calibration tasks, history data of multiple RadiCS clients via a network, and remote QC functions.

Presence Sensor for Convenience

The presence sensor on the front of the Clip-On Swing Sensor G2 determines whether to start QC tasks such as calibrations automatically at scheduled times. If the user is working, the QC task stays in stand-by mode, and when the user is away from the monitor the task is performed.

Presence Sensor for Power Savings

The presence sensor feature unites convenience with savings by ensuring that the monitor conserves power when it is not in use. The presence sensor prompts the monitor to switch to power save mode when it detects the user away from the monitor, and then resume normal operation when the user returns.

Model Variations MX220W-H: Height Adjustable Stand
MX220W-FS: FlexStand
1 Average response time measured between each grayscale level of 31, 63, 95, 127, 159, 191, and 223.
2 Display of mammography images for diagnosis is not supported.